Re: Can't overclock my HD4000
I am having problems with the Intel Extreme Tuning Utility as well; I can't manually tune, however I have Intel Turbo Boost and everything. I can't control the Manual Tune tool, anyone have any...
View ArticleRe: Running a .py File
You can definately save it onto the SD card. If you put the file in the top directory of the SD card, the file would be located in this directory. In my case it is /media/mmcblk0p1 (multimediacard...
View ArticleRe: OpenCV projects ?
I have connected my webcam to my Galileo, but I am not smart enough to figure out how to get it to work. I have never played with OpenCV. I do believe the main purpose for the Host USB connection was...
View ArticleCpu sharing/system to system hook up?...is this going to be able to be done?
HelloI have seen for some time the ability to share GPUs on video cards in single system setups.Having more than one computer here, I was wondering when a port is going to be put on Motherboards that...
View ArticleRe: Cpu sharing/system to system hook up?...is this going to be able to be done?
Perhaps a new device that can hold several CPUs of similar format up to 10 / memory slots, and ties into one controller system...via specific port...?
View ArticleRe: widi stops working exactly every 10 minutes
I have sent you some instructions via private message.
View ArticleRe: S1200V3RPM CPU Fan Speed at 100%
Seems your USB key is not properly recognized by the system. After you plug it, wait for a while (like 10 seconds) to let it initialize. You should hear a short beep indicating USB device connected....
View Articlesketch debug error , win7
I didn't get galileo yet but i tried to debug blinking sketch without the board and i got this error :Arduino: 1.5.3 (Windows 7), Board: "Intel® Galileo" i586-poky-linux-uclibc-g++: error: Files: No...
View ArticleRe: sketch debug error , win7
Looks like an issue with spaces in the path. Try moving the 'arduino-1.5.3' root folder to C:\.
View ArticleRe: sketch debug error , win7
I meant that the path should read like C:\arduino-1.5.3. Based on the error message, it looks like it's in C:\Program Files (x86)\arduino-1.5.3.
View ArticleClik here to view.
Re: Intel(R) Graphics HD 4000 Driver for Windows 8.1 (Not Working Properly)
Piclsa08 Even with an HDMI cable connecting the PC to the TV, you can't get the TV to serve as a second monitor?If it was a wireless HDMI substitute then yes I could understand that, But you are...
View ArticleDisplay drivers not responding?
The specific message is "display driver intel graphics accelerator drivers for windows 8(r) stopped responding". Curious thing is, I don't run windows 8. I'm on windows 7. The screen typically goes...
View ArticleRe: Problem with PVT3000 on a Lenovo Yoga 2 Pro
You may try resetting the TV adapter since it also stores profile information.
View ArticleRe: Intel(R) Graphics Media Accelerator 3600 Series WINDOWS XP driver
I've got an Acer Aspire One D270-1492. I was almost suicidal after trying everything here but nothing worked. This finally worked for me.1) Go to the following...
View ArticleClik here to view.
Configuring the /dev/ttyS0 Serial Port in Linux
While this information can be derived from Galileo GPIO documentation and might be available elsewhere in bits and pieces, I wrote this post for everyone's convenience:...
View ArticleRe: Intel HD 3000
Please take a look here: C920 Webcam 'jerky' framerate on Windows 8 64-bit - Logitech Forums
View ArticleRe: I Compiled the Poky Distribution. Now what?
I think I got the same error when I was trying to build the image-sdk after building image-full. Image-full uses ulibc, but Sergey's instructions for preparing image-sdk result in using eglibc. As...
View Article