Re: Wireless display not appearing in charms menu - Windows 8.1, Sony Vaio...
The idea behind my response above is to focus all efforts of this issue in a single thread.I previously commented about the VPN software workaround, I know it is not a proper solution for everybody; I...
View ArticleClik here to view.
Re: Low-level array questions
Yeah, that's the issue that brought up my question. The Z68 I believe is a 6 series board while I'm currently on a late x58. My hope was that with write-back caching enabled, the RAID chipset would...
View ArticleCIR Issue with Power On from S3 Sleep Mode
Hello, I'm having an issue in which I am not able to power on the D34010WYK NUC from a S3 sleep state in Win 8.1 x64 using a Logitech Harmony or MCE remote. When the NUC is on, every IR command is...
View ArticleRe: Another Windows 8.1/ Wireless-N 2230 problem user
The log appears to indicate a problem with the profile (association failure). You may try deleting the profiles to try again, or with the connection as unsecured, just for testing. Updating the...
View ArticleRe: NUC Haswell reboots after shutdown
Doesn't this appear in your BIOS?NUCHaswelli5User wrote: checked 'Deep S4/S5.'I'm not sure what this is.. Thanks sylvia_intel.
View Articlep7350 - can i run 64 bit windows 2008/2012 on it
Hi, I have hp pavillion p7350 with widows vista home premium 64 bits on it.p7350 @2.00Ghz, 2000 mhz, 2 cores, 2 logical processorsbios version - Hewlett-Packard F.21, 8/20/2009SMBios version 2.4 Now I...
View ArticleRe: iSSDFUT 2.0.9 Not Working?
13" Macbook Pro mid-2009 5,5Intel 530series 180GB Firmware DC12 Blackmagic is giving me ~ 133 MB/s.. I know my SATA Link Speed maxes out at 3 Gigabit, but this seems a bit too slow. I want to upgrade...
View ArticleRe: DH87RL Windows 8.1 CIR doesn´t work
built-in IR receiver is not working for me on NUC D34010WYK, win8.1 x64 Drivers install fine and are listed as compatible for win8.1 x64. Device manager lists both nuvoton and ehome and says devices...
View ArticleRe: Old drive, new computer
More information needed. Are you trying to boot the old sata XP drive on the new pc? Doc
View ArticleSampling Rate of the Analog Inputs
Hi, I am working on a project that requires the use of audio signals as inputs, and I had some concerns regarding the sampling rates of the Analog inputs I'm confused about what the Galileo's actual...
View ArticleRe: Windows* 7/8/8.1 Driver (32 & 64 bit) Version 3345
To everyone who has had this issue with gaming and the intel driver crashing, I was given a stable (though I think temporary) solution for an integrated Intel HD 4000 and Nvidia 610m Geforce. Changing...
View ArticleRe: Is it possible to use intel galileo for bare metal programming?
Thanks. This looks really interesting to do. but is there any document which explains this process or way to achieve it?the manuals seems to contain large information of IA processors. What I was...
View ArticleRe: Old drive, new computer
You cannot boot the old drive (with XP installed) on the new computer. The drivers needed for the new hardware (chipset, processor, devices, etc) are not there (as part of the old XP configuration)....
View ArticleSlow speeds with Wireless N 7260 after update.
I have a 60Mbps connection at home and with the 7260 card I used to get up to 56Mbps through my laptop but since driver version 16.6.0.8 I can only ever get a maximum of 25Mbps. Nothing else has...
View ArticleRe: Ethernet Adapter Woes (Galileo)
Hi JamesBond, The code you are writing will run on your Galileo board, and the ifconfig command that will be executed in the second system() line will set the configuration of the Gallileo board, not...
View ArticleD54250WYK - speed of processor limited by system firmware?
Is anybody getting these messages in their event logs:- The speed of processor 0 in group 0 is being limited by firmware. The processor has been in this reduced performance state for xxx seconds since...
View ArticleRe: Ethernet Adapter Woes (Galileo)
Thanks, Thomas, it worked great! However, do you know of a way to check if linux has installed, or by simply accessing telnet guarantee that linux has been installed?
View ArticleDZ87KLT-75K: Cannot upgrade to BIOS 0447
I currently have BIOS 0346 that came with ME firmware 9.0.20.1447. I upgraded to ME firmware 9.0.30.1482. Now I cannot upgrade to BIOS 0446 or 0447 because the ME firmware in these releases is still...
View ArticleRe: Ethernet Adapter Woes (Galileo)
You are welcome! If you can telnet into the Galileo board and get a prompt, Linux is for sure running on your Galileo board ;-) It is either loading the OS from the SPI flash or if you have an SD card...
View Article