I have an Intel Q35T-AM (SN) Motherboard.In this MBD I am using 512MB DDRII RAM * 4 with populated in all the 4 DIMM Slots.Some times this MBD is getting the fault of No display.During this fault we need to remove the One,Two or Three RAMs from its DIMM slots to get the MBD as Working.After Few Days if we install the Removed RAMs then it is working properly for few days.Again the same kind of problem occuring & we need to remove some RAMs to make it work.In this scenario There is no problem with the RAM because all the RAMs are same Brand (Samsung) and same capacity(512MB DDR2) and the Clock Frequency(PC2-5300U-555MHz) also same.What may be the root Cause for this Peculiar Issue?Any help is highly appreciated..
Regards,
Madhan.S