doom_laur wrote:
First, thanks for the info Image may be NSFW.
Clik here to view.As I wrote above, there is no category for Storage controllers, so no, I don't have the IDE entry either, which was there. The rest is the same as here (more ATA channels and the Standard AHCI driver). I will try to do that later, when my girlfriend will go sleeping Image may be NSFW.
Clik here to view.
ok, that is all good then. With the F6 driver loaded at install time, then there should be a storage controllers category with the intel controller in it and half of the ata entries gone, or no ata entries if marvell is disabled.
doom_laur wrote:
By the way, now I don't have Intel RST on my main Windows but I let the... driver installed somehow, because it shows: Intel(R) 6 Series/C200 Series Chipset Family 6 Port SATA AHCI Controller - 1C02. Is it ok to let it like this? I don't mind if the driver works at least half, as long as it's better than the standard driver.
So the strange ide entry has also disappeared in the ssd windows?
Yes, it is fine like this and is equal to best performance.
Also, with the marvell disabled, or if it is enabled but with it's F6 driver loaded [either by update driver or running the marvell desktop installer], then there should be no ata entries, only storage controller entries.
